MRWT/S are reversible fully mounted plough with hydraulic operated working width. MRWT/S has a well thought out construction were the furrow width can be controlled from 30 to 50 cm. The pivot point for the furrow width adjustment is placed in the pulling line of the plough beam. This minimizes the adjustment forces and the wear of the bearings. All pivot points in the furrow width adjustment are also equipped with replaceable bushes with greasing possibility. The greasing reduces the forces required, and prevents dust and water getting in. Agrolux MRWT/S has a high strength compared to the weight ratio! The direction of turnover or turnunder can be chosen according to the conditions. During the turn process, while the frame is aglinmet, the working width is not reduced.