HRWT/S is the plough model from Agrolux for tractors up to 220 hp.. The plough range is equipped with a heavy duty headstock with a 150 mm pivot shaft and needle bearings. The five furrow models are equipped with an alignment cylinder as a standard. The working width is hydraulically adjustable within a range of 30 to 50 cm. The favorable geometry in the regulation system makes it possible to adjust the working width on the go with relatively low pressure. All pivot points in the furrow width adjustment are equipped with replaceable bushes with greasing facilities, for less frictionand for keeping the dirt and water out. During the turn process, while the frame is alignmet, the working width is not reduced.